PRODUCTS

OUR PRODUCTS 



Number of views:

1000

MGG/KL-PF

MGG/KL-PF partial filled electromagnetic flow meter is a flow automatic measuring instrument use for continuous measurement in open pipeline(half pipe sewage or mass flow pipe with none down flow weir) by velocity-area method. It can measure and display instantaneous flow rate, flow velocity, accumulated flow rate and any other data. It’s specially applicable to the measurement of municipal rainwater、sewage water、waste water and irrigation water.

Retail price

0.0

Yuan

Market price

0.0

Yuan

Number of views:

1000

Product serial number

Quantity

Stock:

Category:

Partial Filled Pipe EMF Flow Meter



Description

Parameters

MGG/KL-PF Partial Filled Electromagnetic Flow Meter

I. Product function introduction

MGG/KL-PF partial filled electromagnetic flow meter is composed by a electromagnetic velocity sensor, a water level sensor and a flow display. It continuous measure the flow rate and liquid level of the liquid in the pipe. The user only input the circular pipe diameter or width of the square pipes, MGG/KL-PF partial filled electromagnetic flow meter will automatically calculate and display the flow, instantaneous flow rate, flow velocity, accumulated flow rate and etc. measure parameters.

1.1 Basic function

(a)Low-frequency square-wave exciting, exciting frequency: 1/16 power frequency;

(b)Exciting current can be selected for 50mA, 75Ma, 100 mA;

(c)Current speed range：0.01 --- 10m/s，current speed resolution：1mm/s;

(d)DC 3.6V switching power，range of voltage：3.6VDC;

(e)DC 12V switching power，range of voltage：12VDC --- 30VDC;

(f)Network function：MODBUS(RTU)， TTL LEV 3.6VDC power;

(g)English displaying mode(other languages can be set);

(h)Forward and reverse measurement could be customized, and record: Forward gross, reverse gross, show 10-digits;

(i)Used for open partial filled pipe(circular tube、Rectangular tube and special pipe);

(j)Used for continuous measurement of municipal rainwater、sewage water、waste water and irrigation water;

(k)Both forward and reverse flow measurement;

(l)Sensors can be in bad live and waste water quality under long-term reliable operation;

(m)The velocity measurement range: 0.05 --- 10 m/s;

(n)High measurement precision and it is not affected by the downstream tributary of harmony to the factors of water blocking;

(o)Short measuring pipe straight pipe requirements;

(p)Big screen back light liquid crystal display, whether bright light or night to be able to clearly read measurement data;

(q)Instrument display and output the function is available, it can display instantaneous flow velocity of cumulative flow data, and communication interface with the computer RS485 (optional);

(r)GSM and GPRS wireless data remote transmission function (optional);

(s)Nominal diameter circular pipes: DN100 --- DN6000(ultrasonic level meter: depth DN<h; range > 5cm; stress level meter 2DN<h; range>2cm. DN is diameter size)

(t)Rectangular pipe: width ≤6m, depth ≤32m.

1.2 Special function

Remember the historical data forever, zero point adjust automatically. It could connected with current meter(4-20A signal)

1.3 Normal working condition

Ambient temperature： –10～+ 60℃;

Relative humidity：5%～90%;

Power supply：AC220V, 110V DC12V, 3.6V battery;

Dissipation power: less than 5W.

II. Technical performance index

2.1 Executive standard

Design, production and testing of partial filled flow converter carry out the Q/KLY 001—2004 enterprise standards.

2.2 Basic parameters and performance indicators