Products


MGG/KL/RG

MGG/KL-RG model electromagnetic BTU meter consists of electromagnetic flow sensor, temperature sensor and electromagnetic heat converter. It is used for measuring the released heat from heat-carrying fluid. It adopts high accuracy and reliable electromagnetic flow meter to measure the flow, high accuracy and reliable platinum resistances to measure temperature; the high speed 16-digit single chip calculates data. So the electromagnetic BTU meter is very excellent on measuring performance.

Ultrasonic flowmeter

Wide Measuring Range:Several types transducer for selection, pipe size from Dn 15 mm to Dn 6000 mm.

MGG/KL-PF

MGG/KL-PF partial filled electromagnetic flow meter is a flow automatic measuring instrument use for continuous measurement in open pipeline(half pipe sewage or mass flow pipe with none down flow weir) by velocity-area method. It can measure and display instantaneous flow rate, flow velocity, accumulated flow rate and any other data. It’s specially applicable to the measurement of municipal rainwater、sewage water、waste water and irrigation water.

Full channel wide electromagnetic open channel flowmeter

L D M-5 1 intelligent open channel flow measuring system (full channel wide box type electromagnetic open channel flow meter) is the only intelligent measuring device that can directly measure the average flow speed of the overflow section. The whole channel wide box electromagnetic open channel flow meter adopts the flow speed-area method, consisting of the whole channel wide electromagnetic flow speed sensor, liquid level sensor and intelligent converter. The working principle is to calculate the section area measured by the area of the channel. The water level of the level meter with different principles, the liquid level meter is generally measured by ultrasonic level meter, pressure level meter, etc. The measurement system can realize precise flow control function by combining gate, solar control system and wireless communication remote control, which is the basis of gate linkage control and information solution in irrigation area.

Solar Power System

• Using single crystal silicon, transfer efficiency>16%, 10 years light failure<10%;• Surface using high transparency armored glass with high optics transmittance and reducing reflection of light to improve the transfer efficiency of photo-voltaic module;

MGG/KL-CC

MGG/KL-CC model insertion type electromagnetic flow converter mated to be MGG/KL-CC model insertion type electromagnetic flow meter to measure the volume flow of kinds of conductive liquids.

< 123 > proceed page